Take complete control over your wireless radio flash system with the FlexTT6 Transceiver from PocketWizard.
Compatible with nearly every PocketWizard radio and with support for Canon's latest cameras and flashes, this E-TTL / E-TTL II compatible transceiver will open the door to advanced off-camera lighting techniques.
As a combination transmitter and receiver, the FlexTT6 can function as both an on-camera master or as a remote slave, and it features a hot shoe on the top for using a flash both on-camera and off.
The FlexTT6 transmits to any PocketWizard receiving radio including the FlexTT5 and has all the great features photographers have come to rely on with our other TTL products: HSS, Patented HyperSync and Interference Free Reliability.
Also, it enjoys PocketWizard's ControlTL technology for both wireless TTL and Manual Power Control settings when working.
Video
Key Features
- ControlTL works with Canon's E-TTL / E-TTL II system to provide full TTL support with the latest cameras and flashes. It also provides the option for Manual Power Control for up to three zones as well as PowerTracking for automatic changes. Another benefit is an optimized High Speed Sync mode for shooting at shutter speeds up to 1/8000 second. Additionally, the Canon model has an optimized rear curtain sync method
- HyperSync technology uses advanced processing to enable faster sync speeds without requiring TTL and dedicated high-speed sync technologies
- A Pre-Flash Boost setting will help compensate for light loss over distance or through diffusion to help the camera accurately meter
- The FlexTT6 is compatible with all PocketWizard radios that operate with a 340-354 MHz frequency
- Users will enjoy a range of up to 800' when using TTL or up to 1200' when used as a basic trigger. This is assisted by a 2.7" rubberized antenna that can be tilted 180° for optimal positioning
- A basic trigger mode is available for use with other brand cameras and for simple manual operation
- Auto-sensing technology allows it to automatically switch between operation as a transmitter or receiver
- An Auto-Relay mode is available for triggering a remote camera as well as remote flashes
- A mini-USB port is available for using the PocketWizard Utility to install firmware updates
- Shoot at speeds within 1 fps of the camera's max fps when using TTL or at the camera's max fps when in basic triggering mode
Compatible Cameras
Canon: 5D Mark IV, 5D Mark III, 5D Mark II, 5D, 1D X Mark II, 1D X, 1D Mark III, 5Ds/R, 6D, 6D Mark II, 80D, 77D, 70D, 60D, 50D, 40D, 30d, 20D, 7D, 7D Mark II, T7i, T6, T5, SL1, XSi
For full feature compatibility, the latest firmware should be used.
Compatible Flashes
Canon: 600EX II-RT, 600EX-RT, 430EX III-RT, 430EX II, 430EX, 580EX II, 580EX
For full feature compatibility, the latest firmware should be used.
Specifications
- TTL Compatibility
Canon E-TTL II
- Frequency
CE model: 433.44-434.42 MHz EU/Asia/Other
- Channels
35 Channels over 5 Frequencies (CE)
- Antenna
6.9 cm rubberized with 180 degree swing
- Transmit output power
Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
- Mounting
Hot Shoe, 1/4-20, lanyard, velcro
- Maximum Shooting Rate Frames per second (fps)
8 fps for E-TTL II and normal triggering
- Power / Channel Switch
OFF - C.2 - C.1
- Zone Select Switch
A-B-C (matches Canon slave groups)
- Status Indicator
LED: Green, Amber, Red status indications
- Camera / P1 Port
3.5 mm stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100 milliamp continuous
Tip = Trigger
Ring = Pre-Trigger
Sleeve = Ground
- Flash / P2 Port
3.5 mm mono miniphone. Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized
- Minimum Receive Contact Time
Camera / P1 Port = 80 milliseconds
Flash / P2 Port = 500us
- Voltage Present
3.3 VDC (all pins) - safe for all cameras
- Hot Shoe voltage protection
Hot Shoe: up to 50V
- USB
USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground
- Operating Temperature
Above -15° C and below 50° C
- Storage Temperature (without battery)
Above -30 C and below 85 C
- Construction
High impact plastic, captive battery door
Hot Shoe made of glass reinforced resin
- Power
Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB
- Battery Life
60 + Hours
- Dimensions
9.2 cm long x 7.3 cm wide x 3.6 cm tall, antenna lowered
- Weight
153 grams, 108 grams without batteries
Included in the box
- FlexTT6 Transceiver
- USB cable
PocketWizard is the brand name for a line of photography accessories which allows photographers to be more creative. PocketWizard radios are the industry leaders in wireless control and synchronization of cameras, flash lighting and light meters. The world headquarters are based out of Shelburne, VT USA where a small group of dedicated employees continue to build the PocketWizard brand as the “must have” photography accessory.